![background image](http://html1.mh-extra.com/html/racom/ripex/ripex_user-manual_3186409188.webp)
A short demonstration of a monitoring message:
07:55:04.661446 [COM1:phy:Rx] length 2
0x0000:
aaaa
07:55:04.674861 [RF:phy:Tx] (88) IP 192.168.141.213.8881>192.168.141.214.8882: UDP,length 32
0x0000:
0800 4500 001e 0000 4000 4011 9dd2 c0a8
0x0010:
8dd5 c0a8 8dd6 22b1 22b2 000a 72cf aaaa
Examples of more complex monitoring outputs can be found later in this description.
■
Interfaces
Tick boxes:
RADIO, COM1, COM2, ETH, Internal
When ticked, the setting for the respective interface(s) is enabled. When the "Internal" interface is
ticked, another set of interface tick-boxes appears as follows:
Internal:
RADIO, COM1, COM2, TS1, TS2, TS3, TS4, TS5, Modbus TCP, TCP proxy
When ticked, the setting for the respective internal interface(s) is enabled (see the description below).
■
Common parameters for all interfaces:
Rx Tx
Tick boxes.
When ticked, packets (frames, messages) coming in the respective direction are monitored. A
packet is considered a Tx one when it comes out from the respective software module (e.g.
RADIO or Terminal Server) and vice versa. When an external interface (e.g. COM:phy) is
monitored, the Tx also means packets being transmitted from the RipEX over the respective
interface (Rx means "received"). Understanding the directions over the internal interfaces may
not be that straightforward, please consult the diagram below for clarification.
Please note the separate monitoring of Rx or Tx frames is not possible at the ETH interface.
Display
List box: HEX, HEX+ASCII, ASCII
Default = HEX
The format of monitoring output.
Offset [bytes]
Default = 0
Number of bytes from the beginning of packet/frame, which will not be displayed. The Length
of bytes will be displayed starting from the immediately next byte.
This feature is not available at the ETH interface.
Length [bytes]
Default = 100
Number of bytes, which will be displayed from each packet/frame.
Example: Offset=2, Length=4 means, that bytes from the 3
rd
byte to the 6
th
(inclusive) will be
displayed:
Data (HEX):
01AB3798A28593CD6B96
Monitoring output:
3798A285
■
Filter parameters for IP/ARP packets
RipEX Radio modem & Router – © RACOM s.r.o.
188
Advanced Configuration
Содержание RipEX
Страница 2: ......
Страница 42: ... DQ Data Quality Min 180 PER Packet Error Rate Max 5 RipEX Radio modem Router RACOM s r o 42 Network planning ...
Страница 222: ...Fig 10 3 ATEX Certificate RipEX 2 3 RipEX Radio modem Router RACOM s r o 222 Safety environment licensing ...
Страница 223: ...Fig 10 4 ATEX Certificate RipEX 3 3 223 RACOM s r o RipEX Radio modem Router Safety environment licensing ...