![background image](http://html2.mh-extra.com/html/racal-instruments/3152/3152_user-manual_3133316071.webp)
SCPI Command Reference 4-8
Common Commands
Parameter Form (Default in Bold)
IEEE-STD-488.2
:SMEMory
Not Confirmed
:MODE
READ | WRITe
Not Confirmed
[:STATe]
OFF | ON
Not Confirmed
:TEST
Confirmed
[:ALL]?
Confirmed
*CLS
Confirmed
*ESE
(0;0;255)
Confirmed
*OPC
Confirmed
*RST
Confirmed
*SRE
(0;0;255)
Confirmed
*TRG
Confirmed
*ESE?
Confirmed
*ESR?
Confirmed
*IDN?
Confirmed
*OPC?
Confirmed
*SRE?
Confirmed
*STB?
Confirmed
*TST?
Confirmed
Output
Configuration
Command Summary
Output Configuration commands control the output function, shape,
frequency, amplitude, filter and state. Optional modes are omitted
from these commands. Factory defaults after *RST are shown in
bold typeface. Parameter low and high limits are given where
applicable. Use the Standard Waveform parameters as described
in Using The APPLy Command.
Commands and Parameters
(Low Limit,High Limit,Default)
[SOURce:]
APPLy:SINusoid {<frequency>,[<amplitude>,[<offset>,[<phase>,[<power>]]]]}
APPLy:TRIangle {<frequency>,[<amplitude>,[<offset>,[<phase>,[<power>]]]]}
APPLy:SQUare {<frequency>,[<amplitude>,[<offset>,[<duty_cycle>]]]}
APPLy:PULSe {<frequency>,[<amplitude>,[<offset>,[<delay>,[<high_time>
,[<rise_time>,[<fall_time>]]]]]]}
APPLy:RAMP {<frequency>,[<amplitude>,[<offset>,[<delay>,[<rise_time>
,[<fall_time>]]]]]}
APPLy:SINC {<frequency>,[<amplitude>,[<offset>,[<number_cycles>]]]}
APPLy:EXPonential {<frequency>,[<amplitude>,[<offset>,[<exponent>]]]}
APPLy:GAUSsian {<frequency>,[<amplitude>,[<offset>,[<exponent>]]]}
APPLy:DC {<percent_amplitude>}
APPLy:USER {<segment_number>,[<sampling_clock>,[<amplitude>,
[<offset>]]]}
APPLy:<function_shape>?
APPLy?
FUNCTion:MODE {FIXed | USER | SEQuence}
(FIX)
FUNCTion:MODE?
FUNCtion:SHAPe {SINusoid | TRIangle | SQUare | PULSe | RAMP | SINC
EXPonential | GAUSsian | DC }
(SIN)
FUNCtion:SHAPe?
FREQuency {<frequency> | MINimum | MAXimum}
(100E-6,50E6,1E6)
FREQuency?
FREQuency:RASTer {<frequency> | MINimum | MAXimum}
(100E-3,100E6,1E6)
FREQuency:RASTer?
FREQuency:RASter:SOURce {EXT | INT | ECLtrg0}
(INT)
Содержание 3152
