20
/ 28
User Manual
Rev. 1.0 - 29/11/16
BLUES30/50NV
ELETTRONICA
goes back to the
predefined menu
.
5.4.4 Settings Menu (Set)
This menu lets to read the working power to read and set the working
frequency.
Menù 7
F1
Regulation of set up frequency. After having set a new frequency value,
press the encoder to confirm the choice. The exciter will release from
the current frequency (the LOCK LED turns off) and it will latch onto
the new operating frequency (LOCK turns back on). Instead, if you let
the timeout go by, the frequency will remain set at the previous value.
Pwr
Visualization of the set up power. In order to modify the power regulation,
use the
predefined menu
like previously described or the
Set
menu.
Pre
Regulation of the preemphasis, selectable between 0 µs, 50 µs and 75
µs.
Imp
Regulation of the Left and Right channel input impedance, selectable
between 10 kΩ or 600 Ω.
Imp
Regulation of the MPX channel input impedance, selectable between
10 kΩ or 50 Ω.
Aud
Regulation of audio modality selectable between STEREO and
MONO.
Cli
Enable or disable the clipper operation.
Inp
Regulation of input mode selectable between AUTO (automatic mode),
digital or analogic.
aTd
Regulation of exchange time between analog and digital.
