![background image](http://html2.mh-extra.com/html/r-sensors/ndas-8426n/ndas-8426n_user-manual_4813829061.webp)
R-sensors LLC
Bldg. 1, 4, Likhachevsky proezd, Dolgoprudny, 141701, Russia
+7 (498) 744-69-95,
NDAS-N. User Manual.
61
Test
tab
This tab allows testing the quality of the connection through a specialized NDAS port. This tool is
useful for remote installation scenarios using long cables. The system tests operation at the speeds of
460800 Baud and 921600 Baud. Correct operation requires that the both tests be passed successfully.
The test takes about 60 seconds to complete.
Note that during the test the device will be disconnected and the NJSP server operation will
be stopped.
Fig. 12.6. NDAS One Manager module. Test tab
13. Raw Data Logger program module (recording raw data)
The
Raw Data Logger
module is designed to record raw data from the NJSP streams to the disk.
The module supports several recording formats, allows configuring recording on the schedule, split files
by time and save metadata.
13.1 Enabling and disabling the module
Click the
Modules
tab on the NDAS-RT main interface. Find the
Raw Data Logger
line, press
the
run/stop
button. When the module is enabled, the
config
button should appear next to the
stop
button.
If the information in the line has not been updated, click the
refresh state
button in the upper right corner
of the screen.