R-sensors LLC
Bldg. 1, 4, Likhachevsky proezd, Dolgoprudny, 141701, Russia
+7 (498) 744-69-95,
NDAS-N. User Manual.
41
8.3. Basic configuration of SeedLink stations
The
Stations
section displays a list of stations and a status message for each station. The
Connected
message indicates that the module has successfully connected to the NJSP server and is
receiving the data. The
Incorrect sample rate
message indicates that the module has connected to the
NJSP server but the sampling rate of the incoming signal is different from the corresponding parameter
for the SeedLink stream.
The stations list interface allows adding a station, remove a station from the list, and edit station
parameters.
Fig. 8.2. SeedLink server module. Stations list
The station settings include:
●
Station name
is a station user name used only for display in the list of stations
●
Station ID
is a station ID (falls into the
station
parameter of
seedlink.ini
and the corresponding
proc
element of the
streams.xml
tree)
●
Channel’s IDs
are channels IDs in the
LL.SSN
format consisting of
location code
,
stream
,
channel
character
●
Sample rate
is a sampling rate of the incoming signal
●
IP address
and
Port
are the NJSP server IP and port to which the station must connect. If a local
module connection is used, it is enough to specify the port, the IP field can be left blank.
