R-sensors NDAS-8426N Скачать руководство пользователя страница 69 | Manualshive

Страница: 69 / 88

R-sensors NDAS-8426N Скачать руководство пользователя страница 69

R-sensors LLC

Bldg. 1, 4, Likhachevsky proezd, Dolgoprudny, 141701, Russia
+7 (498) 744-69-95,

[email protected]

NDAS-N. User Manual.

69

15. Operating conditions

The operating temperature range of the Data Logger is from -40 to + 85°C (-40 to + 185°F). However,

it should be taken into account that optionally installed internal and external components can have a
narrower temperature range of operating temperatures.

In particular, Industrial Temperature class MicroSD cards have an operating temperature range from

–40 to + 85°C while those of Commercial class are operational at the temperatures of –20 to + 85°C. The
3G/LTE modules have an operating temperature range of –35 to + 75°C while SSD drives are operational
8 to + 70°C and so on

7

.

Note that the range of ensured operability of the Data Logger is determined by the component
with the narrowest range of operating temperatures.

In accordance with the Ingress Protection Code, the degree of protection of this device is

IP 65

– dust

tight protected from powerful water jets (No ingress of dust; complete protection against contact. Water
projected by a nozzle (6.3 mm (0.25 in)) against enclosure from any direction shall have no harmful
effects).

In accordance with the NEMA 250-2003 standard, the data logger complies with the NEMA TYPE

4 (dust and performance of equipment for indoor and outdoor use).

The data logger must not be immersed in water or installed in flooded areas without additional
protection!
To ensure the degree of dust and water tightness, make sure that all unused connectors are
covered with protective caps!

16. Carrying and storage

The data logger is durable enough and practically is not subject to damage during transportation. Use

the packaging that came with the device or any packaging materials to prevent damage to the connector
on the housing cover and scratches on the housing. The storage temperature ranges from –40 to + 85 ° C
(-40 to + 185°F).

17. Warranty and service

The warranty period of the product is 18 months. During this period the replacement or repair of the

defective product will be made free of charge at the expense of the manufacturer.

After the warranty period the repair and maintenance of the device are carried out for a set fee.

7

This paragraph shows the characteristic parameter values for device classes. The devices you use may have different

parameters. Always consult the documentation of the component manufacturer.

«
...
67
68
69
70
71
...
»

Содержание NDAS-8426N

























































































Отзывы:

Нет отзывов