ADIC Management Console User’s Guide
69
If I/O to the device cannot be stopped, or if you change your mind, select
No
to cancel the firmware
upload.
After the firmware upload is complete, you will be prompted to
Restart
the appliance. Refer to
Using
Restart
on page 60.
Editing Device Maps
Some applications require LUNs to be presented in an order other than the order that the discovery routine
presents them to the SNC.
1
Log on as SAN administrator, portal administrator, or power user.
2
Right-click the appliance in the navigation panel or the graphical panel.
3
Select
Device Map
.
The
Device Mapping
dialog box is displayed.
The
Device Mapping
dialog box uses the device numbering format “Channel [Target ID:Device LUN]”
after the channel type, “SCSI” or “Fibre.”
Grayed-out images of these same devices, without the assigned LUNs, appear in the right column.
LUN 0 typically is occupied by the appliance’s “Control LUN,” unless it has been manually assigned to
another LUN.
Devices are assigned LUNs by the initial discovery. They appear in black type on the left.
4
To reassign the LUN, drag a device that is displayed in the left column back to the right column or
directly to another space in the left column.
To delete a device, drag and drop it onto the trash can icon.
5
Continue until all devices are assigned.
6
When you are satisfied with the assignments that have been made, select
OK
.
7
Restart the appliance. Refer to
Using Restart
on page 60.
8
Reboot the host, or use some other method to ensure that the host is aware of the new device map.
Note
Basic users are not authorized to configure the device map. If the portal
administrator or power user have access to a portal with only partial access
to the device mapping configuration, only the SAN administrator can modify
access.
CAUTION
Making changes to LUN assignments in the persistent address map
database can affect SFM, eVPS, and VPM access settings. If you
assign different LUNs to devices that are under access control by
more than one of these methods, the same LUN could become
associated with different devices and data would be lost.
Note
The right column can temporarily hold an item while you scroll to an appropriate
open space in the left column, but no items can be left in the right column. They
must all be mapped to an assigned LUN position in the left column.
Содержание Scalar i2000
