Quantum Scalar i2000, Руководство пользователя

Страница: 45 / 120

ADIC Management Console User’s Guide 37
Creating, Modifying and Deleting User Accounts
All users who are not SAN administrators must be assigned privileges for one or more portals. Create the
subportals before adding users. Refer to
Working with Portals on page 39.
Adding a New User Account
1 Log on as SAN administrator or portal administrator.
2 Select the Admin menu, point to User menu, then select New .
3 The New User Account dialog box is displayed. Type a name for the new user account.
User names are case-sensitive.
4 Type the password after Enter Password and again after Confirm Password .
If you do not type the password the same way both times, a warning is displayed.
5 Assign a privilege level.
The choices are SAN administrator, portal administrator, power user, and basic user.
After you decide on the privilege level, use the radio buttons on the New User Account dialog box to
assign it.
6 Once the New User Account dialog box is completed, select Next .
The Grant Portal Access Permission dialog box is displayed.
Select the checkboxes to check them and clear them until access is appropriately assigned.
Select Back to assign the new user to a different privilege level.
Select Cancel if you decide not to add a new user.
Upload configuration Y Y
5
Y
5
N
Upload firmware Y Y
5
Y
5
N
Restart the appliance Y Y
5
Y
5
N
Obtain CFL data Y Y Y
5
N
Obtain drive dumps Y Y Y
5
N
CAUTION
After the initial log in, set up another SAN administrator. Setting up a
SAN administrator disables the default admin logon name.
Note
No two users can have the same user name.
Table 1 User Capabilities Based on Privilege Level (Continued)
Capability SA
1
PA
2
PU
3
BU
4
1
SA=SAN administrator
2
PA=portal administrator
3
PU=power user
4
BU=basic user
5
If the portal defined for the
PA or PU includes only part of the appliance to be acted on, this privilege is assigned only to the SAN
administrator.