Quantum Scalar i2000 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 120

background image

ADIC Management Console User’s Guide

5

Heartbeat

AMC monitors system components to ensure continuity of service. If an SNC or MCB is no longer available,
the server component notifies monitoring clients.For more information, refer to

Checking the Heartbeat

on

page 99.

Health Checks

Instantaneous and periodic health checks allow monitoring of each appliance and the devices attached to
it. For more information, refer to

Using Health Check

on page 98.

Channel Zoning

Channel zoning is a means of managing the access security between SAN connections and SCSI or FC
devices on a channel by channel basis.

•

Channel zoning can be used to secure access between a server and its storage, segregating them,
for example, from other servers and their respective storage.

•

The default settings allow all SAN connections to access all SCSI or FC devices.

Data Mover

The SNC can move data directly between storage devices that are attached to it. Data Mover frees-up
valuable system resources on the server and substantially increases the speed of backup and restore
operations.

Data Mover is the engine for server-free backup and restore and hierarchical storage management
applications that support the extended copy specification (ANSI T10/99-143r1).

Scalar

®

Firewall Manager / Virtual Private SAN

®

Scalar

®

Firewall Manager (SFM) and Virtual Private SAN

®

(VPS) technology enable SANs with multiple

users to share the same connectivity channels in order to access the same or different storage elements by
creating multiple virtual private connections.

SFM and VPS manage the access between an initiator (user, host, system) and a target/logical unit number
(LUN).

extended VPS

®

The extended Virtual Private SAN

®

(eVPS) functionality enables access control and mapping of FC and

SCSI devices and provides the flexibility to map the attached devices to any user-defined LUN separately
and individually for each Fibre Channel attached host. Because eVPS is backwardly compatible, current
users of VPS and SFM can preserve current mappings when their licenses are upgraded.

Virtual Private Map

Virtual Private Map (VPM) technology enables legacy and new systems equipped with SCSI host bus
adapters to access Fibre Channel devices. VPM allows Fibre Channel and SCSI target devices to be
mapped to private SCSI host channels.

«
...
11
12
13
14
15
...
»

Содержание Scalar i2000

























































































































Отзывы:

Нет отзывов

Похожие инструкции для Scalar i2000

Бренд: IBM Страницы: 25

Electric Bass Vol. 1—Rock

Бренд: M-Audio Страницы: 4

Бренд: Avaya Страницы: 20

Бренд: NAPCO Страницы: 2

ATV-TURBO - WINDOWS 98

Бренд: OCZ Страницы: 5

Бренд: Baracoda Страницы: 6

Бренд: Juniper Страницы: 632

Discover ActiveX

Бренд: Teklynx Страницы: 165

APPLICATION STACK 2.0 RELEASE

Бренд: Red Hat Страницы: 26

NETWORK SATELLITE SERVER 4.0

Бренд: Red Hat Страницы: 80

NETWORK - USER REFERENCE GUIDE 3.1

Бренд: Red Hat Страницы: 78

NETWORK SATELLITE 5.1.0 - CHANNEL MANAGEMENT

Бренд: Red Hat Страницы: 300

DVD MOVIEFACTORY 5

Бренд: Ulead Страницы: 72

Topo North America 9.0

Бренд: DeLorme Страницы: 257

Бренд: Denon Страницы: 29

Бренд: Pfaff Страницы: 8

AURORA PLAYOUT 7

Бренд: GRASS VALLEY Страницы: 4

Бренд: GRASS VALLEY Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды