ADIC Management Console User’s Guide
11
7
When you are asked to configure network discovery, be sure the network segment you define includes
the SAN components you identified in
Step 2
of
Before Installing AMC
on page 9.
8
The e-mail configuration portion of the installation requires the following information:
•
Network name of your mail server, for example, MyMailServer.
•
Valid e-mail account for the specified SMTP server, for example, Joan.Dow
•
Valid password for this e-mail account, for example, *u!nBe
•
E-mail address that you want mail recipients to see when AMC contacts them. This need not
be an e-mail address that has been previously validated by a working mail server, for example,
[email protected]
9
Proceed to
Launching the AMC Server
.
Launching the AMC Server
After you launch the server, be sure it completes network discovery before you launch the client. When a
server has completed network discovery and is ready to receive connections, the message
Ready.
Waiting for commands
is displayed above the prompt in the server window.
Launching a Windows Server
Launch the server at the beginning of your SAN Management session, but do not exit the server when you
are finished. Leave the server running.
1
Select the
Start
button, point to
Programs
.
2
Point to
ADIC Management Console
. Then select
Server
.
If you installed the AMC server on a non-default path, launch it from that location instead.
Once you launch the server, a window opens on your monitor. You will know that network discovery has
been completed when you see the message
Ready. Waiting for commands
followed by a
command prompt.
If your configuration consists of many large or remote network segments, discovery can take several
minutes to complete.
3
Proceed to
Launching the AMC Client
on page 13.
Launching a UNIX Server
Launch the server at the beginning of your SAN Management session, but do not exit the server when you
are finished. Leave the server running.
•
To launch the AMC server from a UNIX system, type
Server
from a terminal window, and press
Enter
.
Server <enter>
Note
Do not close the server window. Follow the exit procedure in
Shutting Down the
AMC Server
on page 17 to shut the server down.
Note
Uppercase S is mandatory.
Содержание Scalar i2000
