ADIC Management Console User’s Guide
17
Select
No
if you have changed your mind. If you select
No
, you are returned to your view.
3
Select
Yes
if you have made changes to the view that you want to save.
Select
No
if you do not want to save changes.
Exiting the AMC Client
Exit
stops the AMC client application and closes its window.
Use
Exit
if you want to restart the client application the next time you use AMC. Normally you will only log
off, and leave the client running between sessions.
1
After logging off, select
Session > Exit
.
The
Exit
dialog box is displayed.
2
Select
Yes
if you want to exit. Your view is closed.
Select
No
if you have changed your mind.
If you select
No
, you are returned to your closed view.
Shutting Down the AMC Server
The way that the AMC server is shut down is the same for all platforms.
1
After you have logged off (refer to
Logging off
on page 16), and exited the client (refer to
Exiting the
AMC Client
), position the cursor after the command prompt in the server window.
2
Type "exit", then press the
Enter
key.
The server window disappears.
Note
You cannot shut down the server that is embedded in an i-platform library.
Содержание Scalar i2000
