Qorvo PAC25140 Скачать руководство пользователя страница 77 | Manualshive

Страница: 77 / 77

background image

PAC25140 Users Guide Preview

No portion of this

document may be reproduced or reused in any form without Qorvo’s prior written consent

Rev. 1.0.0 28 February 2023 © 2023 Qorvo US, Inc.

77 of 77

10 LEGAL INFORMATION

For the latest specifications, additional product information, worldwide sales and distribution locations:

Web:

www.qorvo.com

Tel: 1-844-890-8163

Email:

[email protected]

The information contained in this

Users Guide and any associated documents (“Users Guide Information”) is

considered to be reliable; however, Qorvo makes no warranties regarding the Users Guide Information and assumes
no  responsibility  or  liability  whatsoever  for  the  use  of  said  information.  All  Users  Guide  Information  is  subject  to
change without notice. Customers should obtain and verify the latest relevant Users Guide Information before placing
orders  for  Qorvo®  products.  Users  Guide  Information  or  the  use  thereof  does  not  grant,  explicitly,  implicitly  or
otherwise any rights or licenses to any third party with respect to patents or any other intellectual property whether
with regard to such Users Guide Information itself or anything described by such information.

USERS GUIDE INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS
DESCRIBED  HEREIN,  AND  QORVO  HEREBY  DISCLAIMS  ANY  AND  ALL  WARRANTIES  WITH  RESPECT  TO
SUCH  PRODUCTS  WHETHER  EXPRESS  OR  IMPLIED  BY  LAW,  COURSE  OF  DEALING,  COURSE  OF
PERFORMANCE,  USAGE  OF  TRADE  OR  OTHERWISE,  INCLUDING  THE  IMPLIED  WARRANTIES  OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Without limiting the generality of the foregoing, Qorvo® products are not warranted or authorized for use as critical
components  in  medical,  life-saving,  or  life-sustaining  applications,  or  other  applications  where  a  failure  would
reasonably  be  expected  to  cause  severe  personal  injury  or  death.  Applications  described  in  the  Users  Guide
Information  are  for  illustrative  purposes  only.  Customers  are  responsible  for  validating  that  a  particular  product
described in the Users Guide Information is suitable for use in a particular application.

© 2023 Qorvo US, Inc. All rights reserved. This document is subject to copyright laws in various jurisdictions worldwide and
may not be reproduced or distributed, in whole or in part, without the express written consent of Qorvo US, Inc.
QORVO® is a registered trademark of Qorvo US, Inc.

«
...
75
76
77

Содержание PAC25140














































































Отзывы:

Нет отзывов

Похожие инструкции для PAC25140

Бренд: Eaton Страницы: 50

Бренд: Paratec Страницы: 8

Бренд: J+J Страницы: 33

Бренд: 1Control Страницы: 8

Бренд: Eaton Страницы: 6

Бренд: Eaton Страницы: 35

Бренд: Eaton Страницы: 18

Бренд: Eaton Страницы: 73

Бренд: Eaton Страницы: 4

Cutler-Hammer IQ DP-4000

Бренд: Eaton Страницы: 87

Бренд: Eaton Страницы: 14

Бренд: Eaton Страницы: 36

PROX-BOOSTER 2G

Бренд: Nedap Страницы: 25

Бренд: Handicare Страницы: 20

U1000 iQpump Drive

Бренд: YASKAWA Страницы: 26

Z1000 CIMR-ZU*A Series

Бренд: YASKAWA Страницы: 2

Бренд: YASKAWA SIEMENS Страницы: 373

Бренд: +GF+ Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды