QNO QVF8034, Руководство пользователя

Страница: 35 / 209

2WAN 4LAN SMB Multi-WAN VPN QoS Router
29
Enable
Line-Dropped
Scheduling
The WAN disconnection schedule will be activated by checking
this option. In some areas, there is a time limitation for WAN
connection service. For example: the optical fiber service will be
disconnected from 0:00 am to 6:00 am. Although there is a
standby system in the device, at the moment of WAN
disconnection, all the external connections that go through this
WAN will be disconnected too. Only after the disconnected lines
are reconnected can they go through the standby system to
connect with the Internet. Therefore, to avoid a huge number of
disconnections, users can activate this function to arrange new
connections through another WAN to the Internet. In this way,
the effect of any disconnection can be minimized.
Line-Dropped
Period
Input the time rule for the disconnection of this WAN service.
Line-Dropped
Scheduling
Input how long the WAN service may be disconnected before the
newly added connections should go through another WAN to
connect with the Internet.
Link Backup
Interface
Select another WAN port as link backup when port binding is
configured. Users should select the port that employs the same
ISP.
Shared- Circuit
WAN
environment
If your WAN connects to a Switch, select “Enabled” to filter
broadcast packets. The default is “Disabled”.
MTU
：
： ：
： MTU is abbreviation of Maximum Transmission Unit. “Auto” and
“Manual” can be chosen. The default value is 1500. Different value
could be set in different network environment. (e.g. ADSL PPPoE
MTU: 1492)
The default is “Auto”.
After the changes are completed, click
“Apply”
to save the configuration, or click
“Cancel"
to leave without making any change.
PPTP
This option is for the PPTP time counting system. Input the user’s connection name and