QNO QVF8034, Руководство пользователя

Страница: 44 / 209

2WAN 4LAN SMB Multi-WAN VPN QoS Router
38
Add To List:
To add a WAN group to the grouping list.
Delete selected
Item:
To remove selected WANs from the WAN grouping.
Apply:
Click “Apply” to save the modification.
Close:
Click “Cancel” to cancel the modification. This only works
before “Apply” is clicked.
After the configuration is completed, in the China Netcom Policy window users can select
WANs in combination to connect with Netcom.
Import Strategy:
A division of traffic policy can be defined by users too. In the “Import Strategy” window, select
the WAN or WAN group (ex. WAN 1) to be assigned and click the “Import IP Range” button; the
dialogue box for document importation will be displayed accordingly. A policy document is an
editable text document. It may contain a destination IP users designated. After the path for
document importation has been selected, click “Import”, and then at the bottom of the
configuration window click “Apply”. The device will then dispatch the traffic to the assigned
destination IP through the WAN (ex. WAN 1) or WAN grouping users designated to the Internet.
To build a policy document users can use a text-based editor, such as Notepad, which is
included with Windows system. Follow the text format in the figure below to key in the destination
IP addresses users want to assign. For example, if the destination IP address range users want to
designate is 140.115.1.1 ~ 140.115.1.255, key in 140.115.1.1 ~ 140.115.1.255 in Notepad. The
next destination IP address range should be keyed in the next line. Attention! Even if only one
destination IP address is to be assigned, it should follow the same format. For example, if the
destination IP address is 210.66.161.54, it should be keyed in as 210.66.161.54~210.66.161.54.
After the document has been saved (the extension file name is .txt), users can import the IP