QNO QVF8034, Руководство пользователя

Страница: 33 / 209

2WAN 4LAN SMB Multi-WAN VPN QoS Router
27
Enable
Line-Dropped
Scheduling:
The WAN disconnection schedule will be activated by checking this
option. In some areas, there is a time limitation for WAN connection
service. For example: the optical fiber service will be disconnected
from 0:00 am to 6:00 am. Although there is a standby system in the
device, at the moment of WAN disconnection, all the external
connections that go through this WAN will be disconnected too. Only
after the disconnected lines are reconnected can they go through the
standby system to connect with the Internet. Therefore, to avoid a
huge number of disconnections, users can activate this function to
arrange new connections to be made through another WAN to the
Internet. In this way, the effect of any disconnection can be
minimized.
Line-Dropped
Period
Input the time rule for the disconnection of this WAN service.
Line-Dropped
Scheduling
Input how long the WAN service may be disconnected before the
newly added connections should go through another WAN to connect
with the Internet.
WAN IP address:
Input the available static IP address issued by ISP.
Shared- Circuit
WAN
environment
If your WAN connects to a Switch, select “Enabled” to filter broadcast
packets. The default is “Disabled”.
After the changes are completed, click
“Apply”
to save the configuration, or click
“Cancel"
to leave without making any changes.
PPPoE
This option is for an ADSL virtual dial-up connection (suitable for ADSL PPPoE). Input the user
connection name and password issued by ISP. Then use the PPP Over-Ethernet software built into
the device to connect with the Internet. If the PC has been installed with the PPPoE dialing
software provided by ISP, remove it. This software will no longer be used for network connection.