QNO QVF8034, Руководство пользователя

Страница: 50 / 209

2WAN 4LAN SMB Multi-WAN VPN QoS Router
44
Service is All 0~65535.
Option List for Service Management: Click the button to enter the
Service Port configuration page to add or remove default Service
Ports on the option list.
Source IP:
Users can assign packets of specific Intranet virtual IP to go
through a specific WAN port for external connection. In the boxes
here, input the Intranet virtual IP address range; for example, if
192.168.1.100~150 is input, the binding range will be 100~150. If
only specific Service Ports need to be designated, while specific IP
designation is not necessary, input “0” in the IP boxes.
Destination
IP:
In the boxes, input an external static IP address. For example, if
connections to destination IP address 210.11.1.1 are to be
restricted to WAN1, the external static IP address 210.1.1.1 ~
210.1.1.1 should be input. If a range of destinations is to be
assigned, input the range such as 210.11.1.1 ~ 210.11.255.254.
This means the Class B Network Segment of 210.11.x.x will be
restricted to a specific WAN. If only specific Service Ports need to
be designated, while a specific IP destination assignment is not
required, input “0” into the IP boxes.
Interface:
Select the WAN for which users want to set up the binding rule.
Enable:
To activate the rule.
Add To List:
To add this rule to the list.
Delete
selected
application:
To remove the rules selected from the Service List.
Moving Up &
Down:
The priority for rule execution depends on the rule order in the list.
A rule located at the top will be executed prior to those located
below it. Users can arrange the order according to their priorities.
Note
！
The rules configured in Protocol Binding will be executed by the device according to