QNO QVF8034, Руководство пользователя

Страница: 31 / 209

2WAN 4LAN SMB Multi-WAN VPN QoS Router
25
Enable Line-Dropped
Scheduling:
The WAN disconnection schedule will be activated by checking
this option. In some areas, there is a time limitation for WAN
connection service. For example: the optical fiber service will be
disconnected from 0:00 am to 6:00 am. Although there is a
standby system in the device, at the moment of WAN
disconnection, all the external connections that go through this
WAN will be disconnected too. Only after the disconnected lines
are reconnected can they go through the standby system to
connect with the Internet. Therefore, to avoid a huge number of
disconnections, users can activate this function to arrange new
connections to be made through another WAN to the Internet. In
this way, the effect of any disconnection can be minimized.
Line-Dropped Period
Input the time rule for disconnection of this WAN service.
Line-Dropped Scheduling
Input how long the WAN service may be disconnected before the
newly added connections should go through another WAN to
connect with the Internet.
Link Backup Interface
Select another WAN port as link backup when port binding is
configured. Users should select the port that employs the same
ISP.
Shared- Circuit WAN
environment
If your WAN connects to a Switch, select “Enabled” to filter
broadcast packets. The default is “Disabled”.
MTU
：
： ：
： MTU is abbreviation of Maximum Transmission Unit. “Auto” and
“Manual” can be chosen. The default value is 1500. Different
value could be set in different network environment. (e.g. ADSL
PPPoE MTU: 1492)
The default is “Auto”.
After the changes are completed, click
“Apply”
to save the configuration, or click
“Cancel"
to leave without making any changes.
Static IP
If an ISP issues a static IP (such as one IP or eight IP addresses, etc.), please select this
connection mode and follow the steps below to input the IP numbers issued by an ISP into the
relevant boxes.