QNO QVF8034, Руководство пользователя

Страница: 43 / 209

2WAN 4LAN SMB Multi-WAN VPN QoS Router
37
IP Session Balance:
If “By IP” is selected, the WAN bandwidth will automatically
allocate connections based on IP amount to achieve network load balance.
Note!
For either session balancing or IP connection balancing, collocation with Protocol
Binding will provide a more flexible application for bandwidth. Users can assign a
specific Intranet IP to go through a specific service provider for connection, or assign an
IP for a specific destination to go through the WAN users assign to connect with the
Internet.
For example, if users want to assign IP 192.168.1.100 to go through WAN 1 when
connecting with the Internet, or assign all Intranet IP to go through WAN 2 when
connecting with servers with port 80, or assign all Intranet IP to go through WAN 1
when connecting with IP 211.1.1.1, users can do that by configuring “Protocol Binding”.
Attention! When the Auto Load Balance mode is collocated with Protocol Binding, only IP
addresses or servers that are configured in the connection rule will follow the rule for
external connections; those which are not configured in the rule will still follow the device
Auto Load Balance system.
Please refer to the explanations in
6.2.3 Configuring Protocol Binding
for setting up
Protocol Binding and for examples of collocating router modes with Protocol Binding.
Strategy Routing Mode
If strategy Routing is selected, the device will automatically allocate external connections
based on routing policy (Division of traffic between Telecom and Netcom is to be used in China)
embedded in the device. All you have to do is to select the WAN which is connected with Netcom;
the device will then automatically dispatch the traffic for Netcom through that WAN to connect
with the Internet and dispatch traffic for Telecom to go through the WAN connected with Telecom
to the Internet accordingly. In this way, the traffic for Netcom and Telecom can be divided.
Name:
To define a name for the WAN grouping in the box, such as
“Education” etc. The name is for recognizing different WAN
groups.
Interface:
Check the boxes for the WANs to be added into this
combination.