Qiagen QIAamplifier 96, Руководство пользователя

Страница: 13 / 122

QIAamplifier 96 User Manual 03/2020 13

The rapid heating of the thermal block can cause liquids to boil explosively. Always wear
safety goggles during operation.

Do not touch hot sample tubes or plates and do not open them or boiling liquid may escape.

Only use plates and tubes that are suitable for high temperatures (up to 100°C), fit well into
the thermal block (no shaking), and whose lids seal tightly.
2.6.2 Safety instructions – protection against explosion and fire
The QIAamplifier 96 must not be operated in an explosive environment.
The QIAamplifier 96 must not be operated with flammable, explosive, or volatile substances.
2.6.3 Safety instructions – electrical equipment
Work on the electrical components of the QIAamplifier 96 may only be performed by a qualified
electrical technician in accordance with the applicable electrical engineering rules. Life-threatening
electrical voltages may occur in the interior of the QIAGEN QIAamplifier 96.
Observe the following:

Any work on the interior of the device may only be carried out by the customer service of
QIAGEN and specially authorized technicians.

The electrical components must be checked regularly by a qualified electrician. Any defects,
such as loose connections and faulty or damaged cables, must be repaired without delay.

Before opening the device, it must be switched off at the power switch and the main plug must
be disconnected from the mains outlet.

The QIAamplifier 96 must be switched off immediately using the power switch (on the
equipment backplate) and the mains plug disconnected from the power supply if any faults
occur in the electric components.

Do not operate the device near sources of strong electromagnetic radiation (for example, an
unshielded, deliberately operated high frequency source), as these may affect proper
operation of the device.
2.6.4 Handling of samples, auxiliary, and operating materials
The operator is responsible for the selection of substances used in the process as well as for their
safe handling. This is particularly important for radioactive, pathogenic, infectious, poisonous,
corrosive, or otherwise dangerous substances. For details, contact the safety officer responsible for
your location. When handling dangerous substances, local safety codes and guidelines must be