Rotor-Gene Q MDx CE User Manual 02/2022
189
Message text
58
Could not create groups.
59
Cannot modify access of inbuilt accounts.
Analysis menu
60
You have only selected one channel for analysis. To select multiple channels, drag a rectangle around
the channels you wish to display in the analysis selection window.
61
You have selected multiple channels for analysis. This analysis technique only allows single channels to
be analysed.
Concentration measurement messages
62
Concentration Measurement performs auto-gain optimisation on the first rotor position. Ensure you have
your highest concentration standard in the first rotor position.
End-point analysis messages
63
To use end-point analysis you must have positive and negative controls in each channel. To define these
controls click OK.
64
You have not defined any positive controls. You must define positive controls for each channel you are
analysing.
65
You have not defined any negative controls. You must define negative controls for each channel you are
analysing.
66
You have not defined any NTC controls. You must define NTC controls for each group.
HRM analysis messages
67
Genotype <GENOTYPE NAME> does not have a control defined.
68
Duplicate genotype combinations are not allowed.
69
High resolution melts are not supported on this instrument. Please contact your distributor for more
information.
Melt analysis messages
70
The genotypes can not be defined until bins have been placed. Please define all bins and then try again.
71
You must enter an abbreviation for <GENOTYPE NAME> genotype.
Scatter plot analysis messages
72
Scatter plot analysis requires exactly 2 channels to be selected. To select multiple channels, drag a
rectangle around the channels you wish to display in the analysis selection window, or click while
holding the SHIFT key on each channel.
Quantitation analysis messages
73
The auto-find threshold feature requires that you have defined at least 2 selected standards. To set this
up, right-click on the sample list and select “Edit Samples...”
