PXM PX125 Opera RedLine, Инструкция по эксплуатации

Страница: 3 / 20

1. GENERAL DESCRIPTION
1
2. SAFETY CONDITIONS
PX125 Opera RedLine controller is powered from standard 230 V grid, what can cause
electric shock when safety rules are not observed. Therefore it is necessary to observe the
following:
1. The device can be connected to the mains through the enclosed power cable only.
2. Controller can be connected to socket which has protecting instalation in working order (3 -
wire grid) only.
3. Power cable should be protected against mechanical and thermal damage.
4. In the event of damaging the power cable, it should be replaced with a cable of the same
technical data and attestations.
5. All repairs demanding casing opening should be made with cut off power supply.
6. Controller should be strictly protected against contact with water and other liquids.
7. All sudden shocks, particularly dropping, should be avoided.
8. Device with damaged (cracked) casing should not be connected to the mains.
9. The device cannot be turned on in places with humidity exceeding 90%.
o o
10. The device cannot be used in places with temperature lower than 2 C or higher than 40 C.
11. Cleaning with damp duster only - PX125 has to be cut off the power supply.
directly
PX125 Opera
Redline
is a professional console for theatre and stage lighting control. In has a block
of 100 programmable channels of adjustable brightness, divided into 10 ranges, consisting of 10
channels each. Opera can store in the memory 100 scenes, 100 chasers (24 steps each) and 10
sequences, 100 steps each. It also has an additional, independent channel for, for instance,
auditorium lighting control. All the saved configurations can be modified freely by the operator,
including changes introducting during rendering. The chasers rendering speed and step-to-step
fader is adjusted with the potentiometers or synchronized with the music. The controller has no
limitation of number of concurrently rendered scenes and chasers.
The Complact Flash card socket allows to store the sequences, chasers and scenes.
By dint of possibility of colour monitor connection, the operator has a permanent visualization of
all controlled channels.
RS-232 coupling allows to connect the console to the computer, for settings storage or software
updates.
Opera is also equipped with the DMX-512 output.