9. PRESET OPERATION MODE
Switch the controller on in the PRESET mode. To do so, switch the controller off, press and hold
the PRESET key, switch the controller on and release the PRESET key after a while. This
operation mode is confirmed by the lit PRESET A/B LED. In this mode you can control the
channels manually only, the access to all saved scenes, chasers and sequences is blocked off.
The scenes settings are realized with the set of A field sliders (upper sliders' set) and B field
sliders (lower set of sliders). The channels' brightness can be set with the appropriate sliders, you
can also change the range with "+" or "-" keys, when needed. The scenes lighting up and dimming
is performed with the A (for the A field) and B (for the B field) sliders. You can also light the channel
up by pressing the key under the slider.
Moreover, the output level is also controlled by the MASTER slider.
~3 secs
ATTENTION!
You must remember, that the MASTER slider has the superior control over all
channels.
13
Содержание PX125 Opera RedLine
Страница 1: ...INSTRUCTION MANUAL PX125 Opera RedLine R...