1
Replacing a Hog iPC Hard Drive
Created by Cat West for High End Systems
November 2007
Replacing a SATA Hard Drive on a Hog iPC Console
Before beginning, follow these setup instructions:
- Disconnect power to the console.
- Disconnect all monitors, external devices (keyboards, widgets, etc) and
remove the main console portion from the roadcase.
Opening the Hog iPC Console:
1. Use a 4mm hex key to remove the 4 silver screws holding the front panel in
place
(encoder
wheels
and
fader
caps
need
not
be
removed).
2. Gently lift the front panel PCB
(circuit board) up as you would a
car hood (there are connections at
the top of this board that can be
damaged if you pull straight up).
Please note this circuit board is not
hinged to the console.
