Orange Amps Fur Coat, User Manual

Page: 1 / 2

IMPORTANT
The ​ ​ Fur ​ ​ Coat ​ ​ can ​ ​ be ​ ​ powered ​ ​ by ​ ​ 9 ​ ​ or ​ ​ 12V ​ ​ DC. ​ ​ A ​ ​ regulated
DC
​ ​
power
​ ​
supply
​ ​
fitted
​ ​
with
​ ​
a
​​ ​
centre
​ ​
negative
​ ​
plug
(2.1mm) ​ ​​ must ​ ​ be ​ ​ used ​ . ​ ​ Running ​ ​ at ​ ​ 12V ​ ​ will ​ ​ increase ​ ​ the
headroom ​ ​ and ​ ​ the ​ ​ output ​ ​ volume ​ ​ available.
9V ​ ​ Battery ​ ​ Operation
To replace the battery, unfasten the four screws on the
base and secure the new battery in the battery clip,
making
​ ​
sure
​ ​
to
​ ​
observe
​ ​
the
​ ​
battery’s
​ ​
polarity
​ ​
(+
​ ​
/
​ ​
-).
The Fur Coat is a fully controllable old school fuzz pedal
inspired by the Foxx Tone Machine. Always place it first in
the signal chain with no buffer as a passive guitar pickup
as part of the circuit. When running the Fur Coat into the
clean channel, the EQ should be set to halfway or lower.
If
​ ​
into
​ ​
the
​ ​
dirty
​ ​
channel,
​ ​
set
​ ​
it
​ ​
higher.
If the octave level is set to less than flat out, the octave
can
​ ​
be
​ ​
controlled
​ ​
using
​ ​
the
​ ​
guitar
​ ​
volume.
Depending on your location, fuzz pedals can pick up radio
signals, ​ ​ this ​ ​ is ​ ​ completely ​ ​ normal.
FUR ​ ​ COAT ​ ​ USER ​ ​ MANUAL
ORANGE ​ ​ AMPS
LONDON ​ ​ • ​ ​ ENGLAND
​ ​
“V
OICE
​ ​
OF
​ ​
THE
​ ​
W
ORLD
​
™
E
ST
. ​​ ​ 1968