background image

This manual provides information for:

DOMESTIC MODELS: 

DEE-4T - 40/60(C,A) INA/2 

DHT - 40/60(C,A) INA/2  

D(L) - 40/60/80 INA/2  

·   Electric, Gas or Steam Heated

·   Floor Mounted

·   Tilting Kettle

·   Tilt Out Agitator Drive System

·   Variable Speed Agitator Controls

·   Inclined Agitator

1055 Mendell Davis Drive 

Jackson, MS 39272

888-994-7636,  fax 888-864-7636

unifiedbrands.net

PART NUMBER 176706, REV. B (11/18)

THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE.  

READ, UNDERSTAND AND FOLLOW THE INSTRUCTIONS AND 

WARNINGS CONTAINED IN THIS MANUAL.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors 

and liquids in the vicinity of this or any other appliance.

WARNING

Improper  installation,  adjustment,  alteration,  service 

or  maintenance  can  cause  property  damage,  injury  or 

death.  Read the installation, operating and maintenance 

instructions thoroughly before installing or servicing this 

equipment.

NOTIFY CARRIER OF DAMAGE AT ONCE

It is the responsibility of the consignee to inspect the container upon receipt of 

same and to determine the possibility of any damage, including concealed dam-

age. Unified Brands suggests that if you are suspicious of damage to make a 

notation on the delivery receipt. It will be the responsibility of the consignee to file 

a claim with the carrier. We recommend that you do so at once.

Manufacture Service/Questions 888-994-7636.

Information contained in this document is known to be current and accurate at the time 

of printing/creation.  Unified Brands recommends referencing our product line websites, 

unifiedbrands.net, for the most updated product information and specifications.

OPERATOR MANUAL

IMPORTANT INFORMATION, KEEP FOR OPERATOR

Summary of Contents for D40 INA/2

















Reviews: