84
DISPOSAL
REGULATIONS
Disposal of electric and electronic products at the end of work cycle
The crossed garbage bin symbol means that the product must be collected separately from other waste at
the end of its useful life. Do not dispose of the product in the domestic litter bin. Check local regulations
for further information regarding the disposal of electronic products.
DECLARATION OF CONFORMITY
The included products satisfy the requirements of the Directive 2004/108/CE.
Manufacturer’s name
P T M S.r.l.
M
anufacturer’s address
Via per Isorella 22A 25010 Visano BS ITALY
DECLARES THAT THE FOLLOWING PRODUCTS
Product name
WEIGHTING SYSTEM
Modelli
ADVANCE
– ADVANCE USB – ADVANCE SUPER USB
IN ACCORDANCE WITH EMC SPECIFICATION BASED ON THE FOLLOWING RULES
EN 61000-6-3 (2007)
EN 55022 (2009)
IRRADIATED EMISSION CLASS B
EN 55022 (2009)
LEADED EMISSION CLASS B
-EN61000-6-1 (2007)
IEC 61000-4-2 (2011)
Electrostatics discharging STANDARD B
IEC 61000-4-3 (2011)
Irradiated fields STANDARD A
IEC 61000-4-4 (2010)
Quickly Transistor/Burst STANDARD B
IEC 61000-4-5 (2007)
Pulses/Surges STANDARD B
IEC 61000-4-6 (2011)
Interferences caused by radio frequency fields STANDARD A
SIGNAL AND SUPPLY LINES: DIRECT CURRENT
The products have been tested under a typical configuration.
VISANO 28-02-2012
Compliance Engineer
Ing. Vittorio Michelotti
In Europe: Get in touch with sales and service department
Ptm s.r.l. via per Isorella 22/A 25010 Visano (BS).
Tel. +0039 030-9952733 Fax +0039 030-9952818
