13
FUNCTION
OPERATION
DISPLAY
TOTAL WEIGHT
Manual TOPCUT
(by request)
Static
Recipe times
Dedicated times
This mode can be set out in the sub menu
MANUAL
TOPCUT
, where it is possible to choose among the
following functioning modes:
STATIC
RECIPE TIMES: with the same Knives IN and
Knives OUT times of the selected recipe
DEDICATED TIMES: with Knives IN and Knives
OUT times independent from the times of the
selected recipe
After choosing one of the three available modes, it is
possible to enable it by pressing the key
in the
screens
TOTAL WEIGHT
and
PARTIAL WEIGHT
.
The word
MAN
or
AUTO
appears above the
TOPCUT
icon, according to the functioning mode selected.
In the STATIC mode, the
TOPCUT
icon shows the
word
MAN
and the knives are activated (IN) and
deactivated (OUT) upon enabling/disabling the mode.
In the modes RECIPE TIMES or DEDICATED TIMES,
the
TOPCUT
icon shows the word
AUTO
and the
knives are activated (IN) and deactivated (OUT)
according to the times set out in the submenu
MANUAL TOPCUT.
These modes can be disabled by pressing
; in
this case the word
OFF
appears above the icon
TOPCUT
.
TOTAL WEIGHT
MULTILINK
(by request)
Module alarms
In case the weighing computer is connected to any
Multilink modules, and there communication problems
with the scale, the icon
is displayed in the
screen
TOTAL WEIGHT
.
By pressing
it is possible to visualize the scrren
ENABLED ALARMS
, with the list of Multilink modules
having communication problems with the scale; in this
way it is possible to identify the source of the fault
immediately.
To leave, press
.
