30
FUNCTION
OPERATION
DISPLAY
MAINTENANCES
(Optional)
If the manufacturer has activated the function
MAINTENANCES in this submenu, it is possible to
visualize the maintenances set for the weighing
computer.
For each maintenance the following data are defined:
Type of maintenances (time-recorder with)
o
T: device switched on
o
L: device during the loading
o
U: device during the unloading
o
W: device during loading/unloading
Name of the maintenance
Hours of alarm
Working time spent from the last zeroing
Total spent working time
For each maintenance it is possible:
To set at zero the working time spent from the
last zeroing (but not the total spent working
time) by pressing
To visualize the quantity of the zeroings for
each maintenance by pressing
NOTE: it is not possible to change the maintenances
set from the manufacturer.
MANUAL TOPCUT
(by request)
The submenu
MANUAL TOPCUT
is visualized only if
the weighing computer is arranged for the function
TOPCUT. It allows to select the mode MANUAL
TOPCUT, which can be enabled from the screens
TOTAL WEIGHT
and
PARTIAL WEIGHT
.
It is possible to change the functioning mode by
shifting the cell with the arrow keys
.
MANUAL TOPCUT
(by request)
Static
The STATIC mode doesn't allow to set out the times
Knives IN and OUT, as from the screens
TOTAL
WEIGHT
and
PARTIAL WEIGHT
the knives are
enabled/disabled with the mode.
Enabling = Knives IN
Disabling = Knives OUT
