42
FUNCTION
OPERATION
DISPLAY
RECIPE SELECTION
R
ECIPES
P
ARAMETERS
SILO
(Optional)
If the weighing indicator has activated the function
SILO, in the window of the advanced parameters it is
possible to activate the management of the automatic
loading of the components from the silo (for the
recipe).
RECIPE SELECTION
R
ECIPE
P
ARAMETERS
TOPCUT
(by request)
If the weighing computer is arranged for the TOPCUT
function, the screen of advanced parameters will also
display the advanced parameters regarding the
AUTOMATIC TOPCUT of the recipe.
In order to enable the TOPCUT function (knives for
grinding the material in the mixer wagon during the
loading operation), place the cell on the flag and press
.
After enabling this function, it is also possible to set
out the other parameters.
RECIPE SELECTION
R
ECIPE
P
ARAMETERS
TOPCUT
(by request)
Knives IN time
Knives OUT time
The times Knives IN and OUT indicate the time for
which the knives remain inside or outside the wagon
during the loading operation.
To change KNIVES IN TIME or KNIVES OUT TIME,
use the numeric keyboard and confirm the entry by
pressing
.
The maximum time value which can be set out is 999
seconds.
RECIPE SELECTION
R
ECIPE
P
ARAMETERS
TOPCUT
(by request)
Mode according to time
In this functioning mode, the Topcut starts at the
beginning of the loading, and remains active for the
overall Global time.
To change the parameters, use the numeric keyboard
and confirm the entry by pressing
.
Start Component = 1
Stop Component = 0 (OFF)
The value of Global time which can be set out is
included between 1 and 180 minutes
