59
LOADING OPERATION
Remainings
Recalculation
If the function REMAININGS RECALCULATION has
been enabled among the RECIPE PARAMETERS,
and if the quantity of material present on the wagon at
the beginning of the loading is higher than the
threshold set out in the submenu RECALCULATION
ACTIVATION,
the
message
RECALCULATE
REMAININGS?
appears on the display.
Upon confirming with
, the quantities of the
components to load are recalculated so that the
weight value at the end of the loading is equal to the
programmed weight.
LOADING OPERATION
First Component
Recalculation
If
the
function
FIRST
COMPONENT
RECALCULATION has been enabled among the
RECIPE PARAMETERS, and if the quantity loaded for
the first component exceeds the threshold set out in
the submenu RECALCULATION ACTIVATION, the
message
RECALCULATE FIRST COMPONENT?
appears on the display.
Upon confirming with
, the quantities to load of
all remaining components are recalculated according
to the variation of the quantity loaded for the first
component.
LOADING OPERATION
Manual dosing
If the quantity of the component to load is lower than
the threshold set out for the manual dosing, the
display shows the quantity to load manually, at the
end of which it is necessary to press
to go on to
the next programmed component.
LOADING OPERATION
TOPCUT
(by request)
If the function TOPCUT has been enabled in the
weighing computer, the symbol TOPCUT and the
Knives times are visualized on the displayed.
It is possible to stop the function Automatic TOPCUT
by pressing
.
