27
FUNCTION
OPERATION
DISPLAY
RECALCULATION
ACTIVATION
The submenu
RECALCULATION ACTIVATION
gives
the possibility to enable three recalculation modes.
RECALCULATION
REMAININGS:
allows
to
recalculate in proportion the component quantities of
the recipe during the loading, in case there's material
remaining in the wagon.
RECALCULATION FIRST COMPONENT: allows to
recalculate in proportion the component quantities of
the recipe during the loading, in case an exceeding
quantity of the first component has been loaded.
RECALCULATION
UNLOADING:
allows
to
recalculate in proportion the quantities for the
unloading groups, in case exceeding quantities have
been loaded.
To leave the submenu, press
.
RECALCULATION
ACTIVATION
Mode activation
In this submenu it is possible to:
enable/disable the three modes by shifting the cell
on the flag on the left of the mode to change
enable/disable the flag by pressing
If the modes are active, it is possible to enable/disable
them in the advanced parameters of each recipe.
If the modes are disabled, they are visualized in the
advanced parameters of each recipe, but it won't be
possible to enable/disable them.
RECALCULATION
ACTIVATION
Recalculation thresholds
It is possible to enter threshold values, under which
the recalculations are carried out.
In order to set out the values:
place the cell on the threshold to change
press
enter the threshold value
confirm by pressing
It is possible to enter values between 0 and 9999.
