PRÜFTECHNIK OPTALIGN smart RS5 BT, Руководство пользователя

Страница: 73 / 194

Horizontal shaft alignment
73
5 .9 .2 Centring the laser beam dot
If the laser beam is not centered, use the screen hints to center the laser beam on the
position detector.
To ensure that the laser beam is not only centered but also reasonably perpendicular,
the “Measurement” screen context menu item ‘XY view’ may be used to check the
location of the beam on both position detectors. Full description of the XY view is in
section 6.2.5.
The beam does not have to be exactly at the center of the crosshair, as this will
not affect measurement accuracy. However, maximum range for measurement is
available when the beam is well centered.
Once centered, the sensor and laser must not be touched, as any movement
during measurement will be interpreted as misalignment. These components
may however be moved when extending the measurement range (see section
6.2.1 ‘Extending the measurement range’).
The Bluetooth status
LED blinks blue when in
operation.
Green/Orange/Red
Blue ‘Laser off’ displayed when
laser beam is out of range
– the beam adjustment LED
blinks red
‘Laser end’ displayed when
laser beam is at the edge of
range – the beam adjust-
ment LED blinks orange
Laser OK / centered when
beam is centered – the
beam adjustment LED blinks
green
The battery icon present on
the “Measurement” screen
shows the charge capacity
of the RS5 BT sensor.
H
Note