PRÜFTECHNIK OPTALIGN smart RS5 BT, Руководство пользователя

Страница: 20 / 194

OPTALIGN smart RS5 BT handbook
20
To mount a plug, push the latching nipple in the forward direction [
1
] as indicated
by the arrow on it then slip the plug into the protruding prongs and slide it to the left
until it latches.
3.3 RS5 laser and RS5 BT sensor
3 .3 .1 RS5 laser ALI 3 .910
The RS5 laser is switched on by pressing its On/Off push button switch. The “beam
active” indicator LED lights red steady then blinks green slowly. The laser is switched
off by pressing and holding down On/Off push button switch until the LED turns off.
The semiconductor laser diode emits a ray of red light (wavelength 630 – 680 nm)
which is visible where it strikes a surface. The beam is emitted with a diameter of ap-
proximately 5 mm (3/16”). The laser is classified with a Class 2 safety rating.
Do not stare into the laser beam!
The beam is adjusted during set-up by changing its vertical and horizontal angles with
thumbwheels so that the beam strikes the sensor lens straight on.
The RS5 laser is water and dust resistant. The internal optics and electronics are
internally sealed, preventing possible contamination.
The battery compartment is not watertight. If water enters this compartment,
open it and dry it out. The two AA size batteries should then be replaced.
3 .3 .2 Laser batteries
The RS5 laser is powered using two high energy AA size alkali-manganese 1.5 V
batteries. These provide a typical operating duration of 180 hours.
As the battery becomes depleted, the colour of the ‘laser active’ indicator LED
changes from green (full) to yellow (half full) to red (empty). When this occurs,
the batteries should be replaced.
If the laser is not in use for extended periods of time, a month or more, the bat-
tery should be removed from the unit.
The batteries are replaced by undoing the quarter-turn screw on the battery
compartment cover by rotating it by at least 90° (1/4 turn). With the screw loosened,
lift the cover, and then use the red strap to remove the batteries. Replace both
batteries at the same time.
s
WARNING
a
CAUTION
a
CAUTION