PRÜFTECHNIK OPTALIGN smart RS5 BT, Руководство пользователя

Страница: 63 / 194

Horizontal shaft alignment
63
To disenable tolerances directly, use the navigation keys and highlight the tick [ ]
and then confirm selection by pressing
e
.
5 .7 .6 Tolerance table
The “Tolerance table” screen may be used to display the suggested active
PRÜFTECHNIK Condition Monitoring tolerance table.
These suggested alignment tolerances are general values based upon experi-
ence and should not be exceeded. They are to be used only if existing in-house
standards or the manufacturer of the machine or coupling prescribe no other
(
tighter
) values.
The tolerance table values are rpm dependent. Changing the rpm results in the cor-
responding gap/offset tolerance values. Use the navigation key to highlight the rpm
box. With the box highlighted, use the data entry keys and enter the required rpm
then confirm entry pressing
e
.
If tolerances are already
disenabled, a “no” symbol
[ ] appears instead of
the tick [ ]. Tolerances
may be enabled directly by
highlighting and the
pressing
e
to confirm
selection.
While in the “Tolerance
table” screen, the
navigation keys may be
used to toggle between the
system and user defined
tolerance values.
a
CAUTION