Configuring the Forum 523/524
68
Configuration
Note:
When the Forum 523/524 is commissioned, all connected
terminals are assigned to the “Administrators” user group. In
your initial configuration, you should configure additional user
groups with restricted authorisations and assign them terminals
as required by your users.
To support your next configuration steps, you should activate the
Assistant
mode on the entry page of the
Configurator
. Please also pay attention to the
online help.
Note:
Deactivate any connection via a proxy server which has been
configured. Open the Internet Explorer, go to the menu
Extras
and open the
Internet options
dialogue box. Select the
Connec-
tions
register and deactivate the
Proxy Server
.
You will find notes on using the
Configurator
and configuring
Ports
,
Users
and
User groups
in the online help. Click on
Help
in the menu bar or click on
TOC
to activate an overview of help topics.
Tip:
Often a yellow exclamation mark symbol appears upon the first-
time commissioning. Click on this symbol to obtain information
on necessary configuration steps or on the communications
system status.
Finishing the Configuration
1.
When you have completed all the settings in the
Configurator
, you must
save the configuration (see also
Saving and Loading the Configuration on
).
2.
Then select the
Log-off
command in the upper menu bar.
Saving and Loading the Configuration
Configurations are saved in a file archive and can be loaded to the Forum 523/
524 either locally from a connected configuration PC, or by remote configu-
ration. The following configuration and customer data can be saved and
loaded again:
●
Telephony and network parameters
●
User data
