Configuring the Forum 523/524
Configuration
69
●
Telephone book entries
●
LCR tables
Note, that for security considerations the passwords for external SIP trunks
are not re-established if you restore a data backup from another (foreign)
communication system. For further information, refer to the online help docu-
mentation under the topic
System: Data backup
.
Preconfiguration
Configuration of the Forum 523/524 can be prepared by a Proximus agent.
For this purpose, a Forum 523/524 installed here is programmed with the
customer data (e.g. user data, call distribution schemes, cord-bound
terminals). This data is stored and then loaded into the Forum 523/524 at the
customer’s site by a service technician.
This prepared configuration must be completed at the customer’s site (pass-
words, SIP trunk configuration, LAN configuration and DECT terminals).
For configuration of the Forum 523/524 Internet functions, first ask the
responsible system administrator for details of the customer’s LAN prerequi-
sites.
Remote Configuration
The Forum 523/524 configuration can be edited or updated by the Proximus
Customer Service Centre via a remote access connection (ISDN-RAS) or via an
Internet connection (reverse ssh tunnel). In the factory setting on delivery, two
Proximus Remote Service Centre telephone numbers are preset, under which
a system technician can dial into the Forum 523/524.
Connection via ISDN
The connection for remote configuration is established using an internal RAS
access. The RAS access is activated when a data call from one of the regis-
tered phone numbers is registered. During remote configuration, the
Forum 523/524 is blocked for RAS access by any further users.
If no RAS access has been configured in the Forum 523/524 Configurator, you
can use a code procedure to release the internal RAS access for remote
configuration, and then block it again. The manual activation is automatically
cancelled 30 minutes after the last configuration activity.
