Configuring the Forum 523/524
72
Configuration
code digit procedure to change these basic settings. Entry can be made from
ISDN telephones, analogue telephones and from system telephones.
Set IP Address
H
* 1 8 2
Z
(system PIN)
*
Z
(www)
*
Z
(xxx)
*
Z
(yyy)
*
Z
(zzz)
#
Set NET Mask
H
* 1 8 3
Z
(system PIN)
*
Z
(www)
*
Z
(xxx)
*
Z
(yyy)
*
Z
(zzz)
#
Note:
The IP configuration will be changed with the next restart of the
communications system.
Example
Enter:
H * 1 8 2
0 0 0 0 * 1 9 2 * 1 6 8 * 9 9 * 2 5 4 #
Initiate a system restart with the following procedure:
Trigger Restart
H
*
1 8 5
Z
(system PIN)
#
Use the PIN you entered in the dialogue box for initial access. The factory
setting is “0000”.
Receiving System Messages as E-Mail
Important events and errors are kept by the Forum 523/524 in an internal log
book: the error store. To inform or alert the system administrators, entries in
the log book (system messages) can be sent via e-mail.
In order not to notified of every error, the administrator can define corre-
sponding log filters (in the
Configurator
, the
Diagnosis: Log Filter
menu).
These filters define which errors (category, severity, number per time interval)
should be notified. The e-mails always include an internal event or error
number, as well as an explanation of the message. Further, extra parameters
(such as the port number when a trunk line drops out) are also provided.
The mail account for this service (
Account for LOG filter
) is configured in the
Configurator
,
Network: E-Mail
menu.
