Configuring the Forum 523/524
Configuration
73
Setting up an Internet Connection from Remote
(ISP Trigger Call)
Z
(reserved tel. no.)
Z
(system PIN)
*
#
If the communications system is connected to the Internet via a dialup
connection, a user can initiate from external that the system establishes an
Internet connection (ISP Trigger call). The system is then reachable via the
Internet and enables to set up a connection for a VPN connection via RAS.
Loading SW Updates
New versions of the system and terminal software can be loaded to the
system.
New software versions of the Forum 523/524 are loaded from the configu-
ration PC, which accesses the
Configurator
(see the
System: Firmware
menu). For information on connecting a configuration PC, see
The terminal software is part of the Forum 523/524 software or firmware
addons and is automatically loaded into the terminals via the Forum 523/524
if the software version in the terminal is different from the terminal software
stored in the Forum 523/524.
For further information, refer to the online help documentation under the
item
System: Firmware
.
Resetting the System Data
You can restore the factory settings of the Forum 523/524 in the Configu-
rator. If this is not possible, refer to the next section entitled
Please note:
If this is done, all individual settings and the user data are then
lost. For this reason, you should back up your configuration
regularly, the best time to do so being after every change. For
details, refer to the chapter entitled
starting on page 68 and to the Web console
online help.
