ProTelevision PT 5780 Скачать руководство пользователя страница 60

Страница: 60 / 95

RS232 Communication

ProTelevision Technologies

PT 5780 DVB-T Modulator

Instruction Manual

Revision 3.11

6-2

•

*SRE

SERVICE REQUEST ENABLE

The device accepts this command but does not act on it.

•

*SRE?

SERVICE REQUEST ENABLE QUERY

The device accepts this query command but does not act on it. Note that this query command
responds with a “0”.

•

*STB?

READ STATUS BYTE QUERY

The device accepts this query command but does not act on it. Note that this query command
responds with a “0”.

•

*TST?

SELF-TEST QUERY

The device accepts this query command but does not act on it.

•

*WAI

WAIT TO CONTINUE

The device accepts this command but does not act on it.

6.2.2

Required Commands

Required commands are those that required in all SCPI compliant instruments.

6.2.2.1

SYSTem commands

•

SYSTem:ERRor?

Query command for reading an SCPI error message from the error queue. See Chapter 6.4 for
a complete list of error codes.

Example:

SYST:ERR?

Response:

-102,”Syntax error”

•

SYSTem:VERSion?

Query command for reading the SCPI version to which the RS232 implementation complies.

Example:

SYST:VERS?

Response:

1995.0

6.2.2.2

STATus commands

•

STATus:OPERation[:EVENt]?

The device accepts this command but does not act on it.

•

STATus:OPERation:CONDition?

The device accepts this query command but does not act on it.

•

STATus:OPERation:ENABle

The device accepts this command but does not act on it.

•

STATus:QUEStionable[:EVENt]?

The device accepts this query command but does not act on it.

•

STATus: QUEStionable:CONDition?

The device accepts this query command but does not act on it.

Содержание PT 5780
































































































Результаты поиска

Содержание PT 5780

Отзывы:

Похожие инструкции для PT 5780

Бренды по названию

Популярные бренды

ProTelevision PT 5780, Инструкция по эксплуатации

Результаты поиска

Содержание PT 5780

Отзывы:

Похожие инструкции для PT 5780

Бренды по названию

Популярные бренды