ProSoft Technology PLX51-HART-4I Скачать руководство пользователя страница 117

Страница: 117 / 127

PLX51-HART-4I / PLX51-HART-4O

♦

HART Input/Output

Diagnostics

Multidrop Field Devices

User Manual

ProSoft Technology, Inc.

Page 117 of 127

5.7 Module Event Log

The module logs various diagnostic records to an internal event log. These logs are

stored in non-volatile memory and can be displayed using the PLX50 Configuration

Utility or via the web interface.
To view them in the PLX50 Configuration Utility, select the Event Viewer option in the

Project Explorer tree.

Figure 5.27 - Selecting the module Event Log

The Event Log window will open and automatically read all the events from the

module. The log entries are sorted so as to have the latest record at the top. Custom

sorting is achieved by double-clicking on the column headings.

Figure 5.28 – Module Event Log

The log can also be stored to a file for future analysis, by selecting the Save button in

the tool menu. To view previously saved files, use the Event Log Viewer option

under the tools menu.

Содержание PLX51-HART-4I
































































































































Результаты поиска

Содержание PLX51-HART-4I

Отзывы:

ProSoft Technology PLX51-HART-4I, Руководство пользователя, Страница: 117 / 127

Результаты поиска

Содержание PLX51-HART-4I

Отзывы: