Proroute
GEM
2M
4G
Router
GEM-2M series User Manual
81
4. Resource:
There are 4 resources can be chosen to control in the QoS rule. They
are “Bandwidth”, “Connection Sessions”, “Priority Queues” and “DiffServ Code
Points”.
5. Control Function:
It depends on the chosen resource. For “Bandwidth” resource,
the control function is “Set MINR & MAXR”. For “Connection Sessions”, the
control function is “Set Session Limitation”. For “Priority Queues”, it is “Set Priority”.
However, for “DiffServ Code Points”, it is “DSCP Marking” and you need specify
the DSCP value additionally.
6.
QoS Direction:
Select the traffic direction to be applied for this rule.
Direction
IN
For Inbound data
OUT
For Outbound data
BOTH
Inbound and Outbound
7. Sharing Method:
If you want to apply the value of control setting on each
selected host in the “Group”, you need to select “Individual Control” for Sharing
Method. On the other hand, if the value of control setting wants to be applied on all
selected hosts in the “Group”, you need to select “Group Control”. For example,
you define Control Function as “Set Session Limitation” and the limited sessions
are 2000 sessions. You also define Sharing Method as “Individual Control”. Then,
that means the maximum connection sessions of each selected host can’t exceed
2000 sessions. On the contrary, changing to “Group Control”, it means that group
of client hosts totally can’t use over 2000 connection sessions.
8.
Schedule:
The rule can be turn on according to the schedule rule you specified,
and give user more flexibility on access control. By default, it is always turned on
when the rule is enabled. For more details, please refer to the
System
->
Scheduling
menu.
