Proroute
GEM
2M
4G
Router
GEM-2M series User Manual
61
MAC address and IP address of local client hosts as following diagram.
3.1.6.2.2 DHCP Server Configuration
1. DHCP Server:
Choose DHCP Server to
Enable
. If you enable the DHCP Server
function, this gateway will assign IP address to LAN computers or devices through
DHCP protocol. This device provides only 1 DHCP server to serve the DHCP
requests from different client hosts.
2. LAN IP Address
: Specify the local IP address of the enabled DHCP Server. It’s
the LAN IP address of this gateway for DHCP-1 server. Normally, this IP address
will be also the default gateway of local computers and devices.
3. Subnet Mask:
Select the subnet mask for the specific DHCP server. Subnet Mask
defines how many clients are allowed in one network or subnet. The default
subnet mask is 255.255.255.0/24, and it means maximum 254 IP addresses are
allowed in this subnet. However, one of them is occupied by LAN IP address of
