Proroute
GEM
2M
4G
Router
GEM-2M series User Manual
142
system will try to trace the specified device to test whether it is alive after clicking
on the “Traceroute” button. A test result window will appear beneath it. There is a
“Close” command button there can let the test result windows disappear.
5. Reboot:
You can also reboot this device by clicking the “Reboot” button.
6. Reset to Default:
You can also reset this device to factory default settings by
clicking the “Reset” button.
7. Wake on LAN
: Wake on LAN (WOL) is an Ethernet networking standard that
allows a computer to be turned on or awakened by a network message. You can
specify the MAC address of the computer, in your LAN network, to be remotely
turned on by clicking on the “Wake up” command button.
8. Backup Configuration Settings
: You can backup your settings by clicking the
“Backup” button and save it as a bin file. Once you want to restore these settings,
please click Firmware Upgrade button and use the bin file you saved.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the
changes.
3.4.2 Scheduling
You can set the schedule time to decide which service will be turned on or off. The added
rules will be listed as below and they can be up to 100 rules.
