Proroute
GEM
2M
4G
Router
GEM-2M series User Manual
140
3.4.1.4 System Tools
The device supports many system tools, including system time configuration, FW
upgrading, system rebooting, system resetting to default, waking on LAN and
configuration settings backup.
1. System Time
: There are three approaches to setup the system time. Before the
process, some basic information must be filled by clicking on the “Configure”
command button. Basic information includes following items:
a.
Time Zone
: Select a time zone where this device locates.
b.
Auto-Synchronization
: Check the “Enable” checkbox to enable this function.
Besides, you can select a NTP time server to consult UTC time from the
available list and by default, it is 132.163.4.102.
c.
Daylight Saving Time:
Check the “Enable” checkbox to enable this function.
d.
Set Date & Time Manually:
Set the date and time for system by manual. But
Auto-Synchronization must be unchecked beforehand to do it.
Above is the first way to setup system date and time. That is, it is the manual way.
The second way is “Sync with Timer Server”. Based on your selection of time
server in basic information configuration, system will communicate with time
server by NTP Protocol to get system date and time after you click on the button.
