Proroute
GEM
2M
4G
Router
GEM-2M series User Manual
141
The last way is “Sync with my PC”. Click on the button to let system synchronizes
its date and time to the ones of the configuration PC.
2. FW Upgrade:
If new firmware is available, you can upgrade router firmware
through the WEB GUI here. After clicking on the “FW Upgrade” command button,
you need to specify the file name of new firmware by using “Browse” button, and
then click “Upgrade” button to start the FW upgrading process on this device. If
you want to upgrade a firmware which is from GPL policy, please check “Accept
unofficial firmware”.
NOTE. PLEASE DO NOT TURN THE DEVICE OFF WHEN UPGRADE IS
PROCEEDING.
3. Ping Test
: This allows you to specify an IP / FQDN and the test interface, so
system will try to ping the specified device to test whether it is alive after clicking
on the “Ping” button. A test result window will appear beneath it. There is a “Close”
command button there can let the test result windows disappear.
4. Tracert Test
:
Trace route command is a network diagnostic tool for displaying the route (path)
and measuring transit delays of packets across an IP network. Trace route
proceeds unless all (three) sent packets are lost more than twice, then the
connection is lost and the route cannot be evaluated. Ping, on the other hand,
only computes the final round-trip times from the destination point. First, you need
to specify an IP / FQDN, the test interface and used protocol number. Used
protocol number is either “UDP” or “ICMP”, and by default, it is “UDP”. Then,
