Proroute
GEM
2M
4G
Router
GEM-2M series User Manual
86
1.
IPSec:
You could trigger the function of IPSec VPN if you check “Enable” box.
2.
NetBIOS over IPSec:
If you would like two Intranets behind two Business
Security Gateways to receive the NetBIOS packets from Network Neighborhood,
you have to check “Enable” box.
3.
NAT Traversal:
Some NAT routers will block IPSec packets if they don’t support
IPSec pass through. If your Business Security Gateway connects to this kind of
NAT router which doesn’t support IPSec pass through, you need to activate this
option in your Business Security Gateway.
4.
Max. Tunnels:
The device supports up to 32 IPSec tunnels, but you can specify
it with the number of maximum current activated IPSec tunnels that is smaller or
equal to 32.
5. You can add new, edit or delete some IPSec tunnels in Tunnel List & Status as
follows.
3.2.3.2.3 Tunnel List & Status
1.
Add:
You can add one new IPSec tunnel with Site to Site scenario by clicking the
“Add” button.
2.
Delete:
Delete selected tunnels by checking the “Select” box at the end of each
tunnel list and then clicking the “Delete” button.
3.
Refresh:
To refresh the Tunnel List & Status each 2 seconds by clicking on the
“Refresh” button.
4.
Tunnel:
Check the “Enable” box to activate the IPSec tunnel.
5.
Edit:
You can edit one tunnel configuration by clicking the “Edit” button at the
end of each tunnel list.
3.2.3.2.4 Tunnel
Configuration
