Promise Technology VTrak D5000 Series Скачать руководство пользователя страница 74

Страница: 74 / 245

Creating an SSD Cache

You have the option to use installed SSD drives for the read and/or write data cache. To create an SSD write

cache, there must be two SSD drives installed in order to mirror the drives. For a read cache, at least one SSD

is needed (no mirroring for the read cache). SSD caching greatly improves read and/or write performance of the

system.

To create an SSD cache, go to the

Pool

menu, expand the

Overview

, and click on

Cache

. This menu lists any

previously created read or write SSD caches. Click the

Create Cache

button.

Use the Create Cache menu to select SSD drives and create a read or write cache.

Create SSD Cache

Promise

Technology

Management with WebPAM PROe

Содержание VTrak D5000 Series





















































































































































































































































Результаты поиска

Содержание VTrak D5000 Series

Отзывы:

Бренды по названию

Популярные бренды

Promise Technology VTrak D5000 Series, Руководство по эксплуатации продукта

Результаты поиска

Содержание VTrak D5000 Series

Отзывы:

Бренды по названию

Популярные бренды