Promise Technology VTrak D5000 Series Скачать руководство пользователя страница 177

Страница: 177 / 245

Caution

For -a add option, if the index specified is already in use,

the existing initiator name is overwritten with new name.

initiator

Usage

initiator [-a <action>] [-i <Index>] [-c <Count>]

initiator -a add [-i <Index>] -n <Name>

initiator -a del -i <Index>

Summary

Use this to display information about the current initiator list as well as to add or delete an initiator.

Options

-a <action>

Which action to perform.

list

(Default) Displays the current initiator list.

add

Add an initiator to the list.

del

Delete an initiator from the list.

-i <Index>

(0-2047) Used to specify the index of the initiator. For -a list option, it is

the starting index and may be used with -c option. For other options, it is

the specific index.

168

Promise

Technology

VTrak D5000 Series Product Manual

Содержание VTrak D5000 Series





















































































































































































































































Результаты поиска

Содержание VTrak D5000 Series

Отзывы:

Promise Technology VTrak D5000 Series, Руководство по эксплуатации продукта, Страница: 177 / 245

Результаты поиска

Содержание VTrak D5000 Series

Отзывы: