Promise Technology VTrak D5000 Series Скачать руководство пользователя страница 154

Страница: 154 / 245

bga

Usage

bga [-a <action>]

bga -a mod -s “<list of settings>”

Summary

The bga command displays all current background activities and makes settings for each background activity.

Options

-a <action>

Specifies the action to perform.

list

(Default) Lists current background activities.

mod

Makes changes to one of the settings.

-s “<option>=<value>”

Specifies which background activity settings to change.

autorebuild=

Enable or disable auto-rebuild and auto-transition.

enable

Auto-rebuild initiates a rebuild of an array when an unconfigured

drive is inserted into the slot of a dead drive.

disable

Auto-transition means transitioning is initiated on a used revertible

spare in the following condition:

1. When the rebuild has been completed using the revertible spare, and

2. When an unconfigured drive is inserted into the slot of the dead drive

which the was part of the array.

When a non-revertible spare has been inserted or created, and is

applicable to the array This option affects all arrays on the subsystem.

Background task rates are used to determine what percentage of the IO

load on the controller should be dedicated to the background task. A

lower number will mean the task takes longer to complete, a higher

number will cause the task to complete faster, all other things being equal.

145

Promise

Technology

Managing with CLI

Содержание VTrak D5000 Series





















































































































































































































































Результаты поиска

Содержание VTrak D5000 Series

Отзывы:

Похожие инструкции для VTrak D5000 Series

Бренды по названию

Популярные бренды

Promise Technology VTrak D5000 Series, Руководство по эксплуатации продукта

Результаты поиска

Содержание VTrak D5000 Series

Отзывы:

Похожие инструкции для VTrak D5000 Series

Бренды по названию

Популярные бренды