Promise Technology VTrak D5000 Series Скачать руководство пользователя страница 102

Страница: 102 / 245

Adding a Fibre Channel or iSCSI Initiator

You must add an initiator to the VTrak D5000’s initiator list in order to map your LUN or logical drive to the

initiator.

This action requires

Administrator

Super User

privileges.

To add a Fibre Channel or iSCSI initiator to the list:

Click the

Device

tab.

Click the

Initiator

icon.

Click the

Add Initiator

button.

4. Choose the network Type (FC or iSCSI)

5. Input the initiator name in the fields provided.

A Fibre Channel initiator name is the World Wide Port Name of the initiator, composed of a series of eight,

two-digit hexadecimal numbers. The iSCSI initiator name is composed of a single text string.

Click the

Submit

button.

The initiator is added.

anagIng

nItIators

Promise

Technology

Management with WebPAM PROe

Содержание VTrak D5000 Series





















































































































































































































































Результаты поиска

Содержание VTrak D5000 Series

Отзывы:

Promise Technology VTrak D5000 Series, Руководство по эксплуатации продукта, Страница: 102 / 245

Результаты поиска

Содержание VTrak D5000 Series

Отзывы: